賈明
工作經歷
2014.8-- 至今大連理工大學能源與動力學院 副院長
2006.9-- 2014.7大連理工大學能源與動力學院 教師
教育經歷
2001.9-- 2006.6大連理工大學 動力機械及工程 博士
1997.7-- 2001.7大連理工大學 熱能與動力工程 學士
學術成果
發表論文
H. Liu, Y. Yan, M. Jia, Y. Zhang, M. Xie, H. Yin. Analytical solution for wall film heating and evaporation, International Communications in Heat and Mass Transfer, 2017.
S. Shen, Z. Che, T. Wang, M. Jia, K. Sun. Numerical Study on Flash Boiling Spray of Multi-Hole Injector. SAE International Journal of Fuels and Lubricants, 10(2), 2017 (SAE Paper 2017-01-0841).
S. Yang, E. Pomraning, M. Jia. Simulation of gasoline engine combustion and emissions using chemical kinetics based turbulent pre-mixed combustion modeling approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231(6):743¬–765, 2017.
G. Xu, M. Jia, Y. Li, M. Xie, W. Su. Multi-objective optimization of the combustion of a heavy-duty diesel engine with low temperature combustion under a wide load range: (I) Computational method and optimization results. Energy, 126:707 –719, 2017.
P. Yi, M. Jia, W. Long, L. Qiao, T. Yang, L. Feng. Evaporation of pure and blended droplets of diesel and alcohols (C2 –C9) under diesel engine conditions. Numerical Heat Transfer, Part A: Applications, 71(3):311–326, 2017.
W. Li, Y. Li, T. Wang, M. Jia, Z. Che, D. Liu. Investigation of the effect of the in-cylinder tumble motion on cycle-
to-cycle variations in a direct injection spark ignition (DISI) engine using large eddy simulation (LES). Flow,
Turbulence and Combustion, 98:601–631, 2017.
W. Yang, M. Jia, Z. Che, K. Sun, T. Wang. Transitions of deformation to bag breakup and bag to bag-stamen breakup for droplets subjected to a continuous gas flow. International Journal of Heat and Mass Transfer, 111:884–894, 2017.
X. Xi, H. Liu, M. Jia, M. Xie, H. Yin. A new flash boiling model for single droplet. International Journal of Heat and Mass Transfer, 197:1129–1137, 2017.
Y. Zhang, M. Jia, P. Yi, H. Liu, M. Xie. An Efficient liquid film vaporization model for multi-component fuels considering thermal and mass diffusions. Applied Thermal Engineering, 112:534–548, 2017.
W. Wei, M. Xie, M. Jia. Large eddy simulation of fluid injection under transcritical and supercritical conditions. Numerical Heat Transfer, Part A: Applications, 70(8):870–886, 2016.
Y. Chang, M. Jia, J. Xiao, Y. Li, W. Fan, M. Xie. Construction of a skeletal mechanism for butanol isomers based on the decoupling methodology. Energy Conversion and Management, 128:250–260, 2016.
Y. Chang, M. Jia, W. Fan, Y. Li, H. Liu, M. Xie. Decoupling methodology: an effective way for the development of reduced and skeletal mechanisms. Acta Physico-Chimica Sinica, 32(9):2209－2215, 2016.
Y. Li, M. Jia, Y. Chang, S. Kokjohn, R. Reitz. Thermodynamic energy and exergy analysis of three different engine combustion regimes. Applied Energy, 180: 849–858, 2016.
H. Liu, Y. Yan, M. Jia, M. Xie, C. Lee. Three-dimensional numerical investigation on wall film formation and evaporation in port fuel injection engines. Numerical Heat Transfer, Part A: Applications, 69(12):1405–1422, 2016.
S Shen, M Jia, T Wang, Q Lü, K Sun. Measurement of the droplets sizes of a flash boiling spray using an improved extended glare point velocimetry and sizing. Experiments in Fluids, 57(4):1–16, 2016.
P. Yi, W. Long, M. Jia, J. Tian, B. Li. Development of a quasi-dimensional vaporization model for multi-component fuels
focusing on forced convection and high temperature conditions. International Journal of Heat and Mass Transfer, 97:130 –145, 2016.
W. Yang, M. Jia, K. Sun, T. Wang. Influence of density ratio on the secondary atomization of liquid droplets under highly unstable conditions. Fuel, 174:25–35, 2016.
Y. Li, M. Jia, Y. Chang, M. Xie, R. Reitz. Towards a comprehensive understanding of the influence of fuel properties on the combustion characteristics of a RCCI (reactivity controlled compression ignition) engine. Energy, 99:69–82, 2016.
G. Xiao, M. Jia, T. Wang. Large eddy simulation of n-heptane spray combustion in partially premixed combustion regime with linear eddy model. Energy, 97:20¬–35, 2016.
M. Jia, E. Gingrich, H. Wang, Y. Li, J. Ghandhi, R. Reitz. Effect of combustion regime on in-cylinder heat transfer in internal combustion engines. International Journal of Engine Research, 17(3):331–346, 2016.
S. Yang, T. Wang, M. Jia., S. Shen. An Experimental Study on Microscopic Characteristics of Flash Boiling Spray with Extended Glare Point Velocimetry and Sizing. Atomization and Sprays, 26(5):463–482, 2016.
代表著作
Qin, Wenjin,Zhou, Lei,Liu, Daming,Jia, Ming,Xie, Maozhao.Investigation of In-Cylinder Engine Flow Quadruple Decomposition Dynamical Behavior Using Proper Orthogonal Decomposition and Dynamic Mode Decomposition Methods[J],JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME,2019,141(8)
Qi, Wenliang,Yang, Zilong,Ming, Pingjian,Zhang, Wenping,Jia, Ming,Wang, Wenhui.Effect of hybrid breakup modelling on flame lift-off length and soot predictions[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY,2018,232(8):1049-1062
Liu, Hong,Zhang, Weilong,Jia, Ming,Yan, Yan'an,He, Yang.An improved method for coupling the in-nozzle cavitation with
Multi-fluid-quasi-VOF model for diesel spray[J],COMPUTERS & FLUIDS,2018,177:20-32
李亮,解茂昭,賈明,劉宏升.超臨界射流模型的構建及驗證[J],上海交通大學學報,2018,52(9):1058-1064
Yin, Cuicui,Wang, Tianyou,Che, Zhizhao,Jia, Ming,Sun, Kai.Oblique impact of droplets on microstructured superhydrophobic surfaces[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2018,123:693-704
Liu, Hong,Cai, Chang,Xi, Xi,Yan, Yan'an,Jia, Ming.A novel model for the bubble growth in the cavitation region of an injector nozzle[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2018,119:128-138
授權專利
三輪高效伸縮摺疊式橫軸潮流能發電裝置
科研項目
反應活性控制壓燃（RCCI）發動機混合氣形成和燃燒過程的機理研究, 國家自然科學基金項目, 2016/12/01, 進行
內燃機噴霧和燃燒模型的開發與驗證, 企事業單位委託科技項目, 2016/03/10-2017/10/31, 進行
內燃機噴霧與燃燒, 省、市、自治區科技項目, 2015/06/25-2017/12/29, 完成
低溫燃燒模式下生物柴油發動機氮氧化物和碳煙排放生成機理研究, 國家自然科學基金項目, 2014/09/01, 完成
均質壓燃發動機流動與燃燒過程的大渦模擬研究, 主管部門科技項目, 2010/01/01-2011/12/31, 完成
基於擬米勒循環的反應物熱力學狀態控制的高效清潔燃燒理論研究, 國家「973」項目 , 2012/12/02, 進行